Electrolux WS290, User Manual

Page: 45 / 60

electrolux 43
Installation instructions
Electrical Connection
Electrical installation must be performed
by an electrician qualified in accordance
with the legislation in force.
Before connecting the crockery warmer to
the electric mains, check that the voltage
and frequency of the mains matches that
which is shown on the rating plate located
in the heating block inside.
The electric connection is made via an
omnipolar switch, which is suitable for the
intensity to be tolerated and which has a
minimum gap of 3mm between its
contacts, which will ensure disconnection
in case of emergency or when
cleaning the crockery warmer. If a plug is
used for the electric connection, then it
must be accessible after installation.
The connection should include correct
earthing, in compliance with current
norms.
WARNING: THE CROCKERY
WARMER MUST BE EARTHED.
If the flexible supply cable fitted to the
crockery warmer ever needs to be
changed, it should be replaced by an
official After Sales Service, because it
requires special tools.
The manufacturer and retailers do not
accept responsibility
for any damage
that may be caused to people, animals or
property if these installation instructions
are not observed.