background image

function increases the programme dura-
tion.

This function is not available with a
temperature lower than 40° C.

PREWASH

• Use this function to add a prewash

phase before the washing phase. We
recommend that you use this function
when you have laundry with a high level
of soil.

The set of this function increases the
programme duration.

Spin button 

9

Press this button to:
• Decrease the maximum speed of the

spin phase of the programme.

The display shows only the spin
speeds available with the set pro-
gramme.

• Deactivate the spin phase.
• Activate the 'Rinse Hold' function. Set

this function to prevent fabric creases.
The appliance does not drain the water
when the programme is completed.

Temperature button 

10

Press button 

10

 to change the default tem-

perature. When the display shows 

 

- -

,

the appliance does not heat the water.

Acoustic signals function

You can hear the acoustic signals when:
• You activate the appliance.
• You deactivate the appliance.
• You  press  the buttons.
• The programme is completed.

• The appliance has a malfunction.
To 

deactivate/activate

 the acoustic sig-

nals, press button 

7

 and button 

8

 at the

same time for 6 seconds.

If you deactivate the acoustic signals,
they continue operate only when you
press the buttons and when a malfunc-
tion occurs.

Child lock function

This function prevents children to play with
the control panel.
• To activate the function, press button 

9

and button 

10

 at the same time until the

display shows the symbol 

 .

• To deactivate the function, press button

9

 and button 

10

 at the same time until

the symbol 

 goes off.

You can activate the function:
• Before you press the Start/Pause button

4

 : the appliance cannot start.

• After you press the Start/Pause button

4

 , all the buttons and the programme

knob are deactivated.

Permanent extra rinse function

With this function you can keep the extra
rinse function permanently on when you set
a new programme.
• To 

activate

 the function press button 

5

and button 

6

 at the same time until the

display shows the symbol 

 .

• To 

deactivate

 the function press button

5

 and button 

6

 at the same time until

the symbol 

 goes off.

WASHING PROGRAMMES

Programme

Temperature

Type of load

Max. weight of load

Cycle de-

scription

Functions

Cottons
(Koch/Bunt /
Blanc/Couleurs)
95° - Cold

White and coloured cotton with heavy
level of soil.
max. load 6 kg

Wash
Rinses
Long spin

SPIN REDUCTION
RINSE HOLD
PREWASH

1)

/STAIN

2)

EXTRA RINSE
TIME SAVE

3)

Extra Silent
(Extra Leise /
Extra Silence)
95° - Cold

White and coloured cotton with normal
level of soil.
max. load 6 kg

Wash
Rinses
Stop with
water in the
drum

PREWASH

1)

/STAIN

2)

EXTRA RINSE
TIME SAVE

3)

electrolux

Summary of Contents for WASL 3 T 200

























Reviews: