Electrolux SG215N, User Manual

Page: 17 / 44

3
1
4
2
11. Remove the covers on the handles
carefully with a small screwdriver.
12. Unscrew the handle.
13.
On the opposite side remove the hole
covers by driving a 3-4 mm drift or drill
into them.
14. Install the handle.
15.
Install the covers on the handle.
16. Install the hole covers provided within
the accessory bag.
17. Raise the appliance and install the
ventilation grill.
18. Put the cabinet in position.
CAUTION!
Reposition, level the
appliance, wait for at least
four hours and then connect
it to the power socket.
Do a final check to make sure
that:
• All screws are tightened.
• The magnetic seal
adheres to the cabinet.
• The door opens and
closes correctly.
If the ambient temperature is
cold (i.e. in Winter), the
gasket may not fit perfectly to
the cabinet. In that case, wait
for the natural fitting of the
gasket.
In case you do not want to
carry out the above
mentioned operations,
contact the nearest
Authorised Service Centre.
The Authorised Service
specialist will carry out the
reversibility of the doors at
your cost.
9.
NOISES
There are some sounds during normal running (compressor, refrigerant circulation).
ENGLISH 17