Electrolux SB907SJ05, Manual

Page: 27 / 27

MODELS: SB907SJ*05 SB907WJ*05 FAULT RECALL, OUTPUT TEST
SB915SJ*05 SB915KJ*05 FAULT & OUTPUT INDICATION
SB915WJ*05 SB925WJ*05
COMPONENT RESISTANCE and MEASUREMENT
Page 27 DW161
COMPONENTS CONNECTIONS SPEC. VALUE NOTES
N
(
note 1
)
↔ A2
0 Ω Power Cable &
ON/OFF Button
L
(
note 1
)
↔ B1 0 Ω
With ON/OFF
button pressed
Heater A1 ↔ C5 25 Ω
Infinite
Water level not
reached
Pressure Switch B1 ↔ C5
0 Ω
Water level
reached
Infinite
Safety water level
not reached
2
nd
Pressure Switch C1 ↔ A2
0 Ω
Safety water level
reached
0 Ω With door closed
Door Switch B2 ↔ D1
Infinite With door opened
Dispenser D5 ↔ D7 1.5k Ω
6.03k Ω At 20
o
C
(
note 2
)
Temperature
Sensor (NTC)
G5 ↔ G6
1.01k Ω At 65
o
C
Turbidity Sensor
(Where Fitted)
(
note 3
)
G7 ↔ G8 --
Check for error
fault stored in
memory ("ib0")
Tachometer E1 ↔ E2 210 Ω
Fan Motor D1 ↔ D3 7.75k Ω
Inlet Valve & Flood
Switch
D1 ↔ D7 2k Ω
C11 ↔ C3 50 Ω Main winding
Wash Motor
Measured on
motor (Blue ↔
White)
130 Ω Auxiliary winding
Drain Motor C11 ↔ C1 180 Ω
Note 1: Measurement points ‘L’ and ‘N’ refer to the pins of the plug fitted to the power cable.
Note 2: The resistance of the thermistor varies in different temperatures. Refer Page 26 for
additional values (NTC Temperature Sensor).
Note 3: Turbidity Signal based on frequency.
G E D C
B
A
8 7 6
5 2 1 7 5 3 1 11 7 5 3 1 2 1 1 2