Electrolux Saladette 950, Installation And Operating Manual

Page: 12 / 26

12
Danger Meaning
caution hot surface
danger of electrocution (shown on electrical parts with indication of voltage)
A.6 Reasonably foreseeable improper use
Improper use is any use different from that specified in this manual. During appliance operation, other types of work or activities
deemed improper and that in general can involve risks for the safety of operators and damage to the appliance are not allowed.
Reasonably foreseeable improper use includes:
• lack of appliance maintenance, cleaning and periodical checks;
• structural changes or modifications to the operating logic;
• tampering with the guards or safety devices;
• failure to use personal protection equipment by operators, specialised personnel and maintenance personnel;
• failure to use suitable accessories (e.g. use of unsuitable equipment or ladders);
• keeping combustible or flammable materials, or in any case materials not compatible with or pertinent to the work, near the
appliance;
• wrong appliance installation;
• placing in the appliance any objects or things not compatible with its use, or that can damage the appliance, cause injury or
pollute the environment;
• climbing on the appliance;
• non-compliance with the requirements for correct appliance use;
• other actions that give rise to risks not eliminable by the Manufacturer.
• failure to insure complete closure of doors or drawers, through forgetfulness or carelessness
• place the product in the compartments so as to block proper air circulation or hinder the perfect closing of doors / drawers
• exceed product weight allowed for each shelf / drawer
WARNING
The previously described actions are prohibited!
A.7 Residual risks
The appliance has several risks that were not completely eliminated from a design standpoint or with the installation of adequate
protection devices. Nevertheless, through this manual the Manufacturer has taken steps to inform operators of such risks, carefully
indicating the personal protection equipment to be used by them. In order to reduce the risks, provide for sufficient spaces while
installing the unit.
To preserve these conditions, the areas around the appliance must always be:
• kept free of obstacles (e.g. ladders, tools, containers, boxes, etc.);
• clean and dry;
• well lit.
For the Customer's complete information, the residual risks remaining on the appliance are indicated below: such actions are
deemed improper and therefore strictly forbidden.
Residual risk Description of hazardous situation
Slipping or falling The operator can slip due to water, any liquid or dirt on the floor
Burns/abrasions (e.g. heating elements, cold
pan, cooling circuit plates and pipes) The operator deliberately or unintentionally touches some components
inside the appliance without using protective gloves.
Electrocution Contact with live parts during maintenance operations carried out with the
electrical panel powered
Falling from above The operator intervenes on the appliance using unsuitable systems to
access the upper part (e.g. rung ladders, or climbs on it)
Crushing or injury The specialised personnel may not correctly fix the control panel when
accessing the technical compartment. The panel could close suddenly.
Tipping of loads When handling the appliance or the packing containing it, using unsuitable
lifting systems or accessories or with the unbalanced load
Chemical (refrigerant gas) Inhalation of refrigerant gas. Therefore always refer to the appliance labels
Sudden closing of the door/drawers (if present,
depending on the appliance type) The operator for normal appliance use could suddenly and deliberately
close (if present, depending on the appliance type):
• door/s
• drawers