3
BEFORE STARTING
(9.)
Check that the dust container / dustbag and motor filter are in place.
(10.) Insert the hose until the catch clicks to engage (press the catch to release the
hose).
(11.) Attach the extension wand or telescopic wand (only on certain models) to the
hose handle and or nozzle (to take them apart again, twist and pull).
(12.) Extend the cord and plug it into the wall socket. The vacuum cleaner has an
integrated cord winder. To rewind the cable press the foot pedal (take hold of
the plug to prevent it striking you).
(13.) Press the ON/OFF button to switch the appliance on.
(13./14.) Adjust suction power using the power control button on the vacuum cleaner
or the suction control on the hose handle.
(15.) A practical parking feature (as well as minimizing the risk of breakage) makes
things easier when pausing during cleaning.
(16.) The parking feature makes it easier to move and store the vacuum cleaner.
USE THE NOZZLES AS FOLLOWS:
Carpets:
Use the carpet/hardfloor nozzle with the lever in position (17). Reduce
suction power for small carpets.
Hard floors:
Use the carpet/hardfloor nozzle with the lever in position (18).
Wooden floors:
Use the parquet nozzle (certain models only, 6).
Special combined nozzle:
Detach the nozzle from the accesory dock and use it
for bookshelves (with folding out of the „brush” end) or crevices, corners (with the
„crevice” end) (8a.)
Upholstery nozzle:
Use the furniture nozzle (8b).
Curtains, lightweight fabrics, etc.:
Use the furniture nozzle (8b).
Reduce suction power if necessary.
Using the turbo nozzle (certain models only) (7)
(19.)
Attach the nozzle to the tube.
Note:
Do not use the power or turbo nozzle on fur rugs, rugs with long fringes or a
pile depth exceeding 15 mm. To avoid damaging the carpet, do not keep the nozzle
stationary whilst the brush is rotating. Do not pass the nozzle across electric cables,
and be sure to switch off the vacuum cleaner immediately after use.
9a
10
11
12
14
15
16
17
19
13
18
9b
