5. Place a tray beneath the outer drain
plug.
6. Pull out the outer drain plug.
7. Rotate the drain plug 180 degrees to
let the drain water flow into the tray.
Make sure the water does
not spill out of the tray.
8. Clean the interior and dry it
thoroughly.
9. Switch on the appliance.
10. Set the temperature to MAX setting
and close the lid. Wait two or three
hours before you reload previously
removed food into the appliance.
11. Set the temperature to the desired
setting.
10. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
10.1 What to do if...
There are sounds which may occur during the operation of the appliance
(e.g. bubbling, whirring, cracking or clicking), which are normal.
Problem
Possible cause
Solution
The appliance does not op‐
erate.
The appliance is switched
off.
Switch on the appliance.
ENGLISH
61
Summary of Contents for GT380
Page 66: ...www electrolux com 66 ...
Page 67: ...ENGLISH 67 ...
