8.2
How to fill the rinse aid
dispenser
A
B
C
CAUTION!
Only use rinse aid specifically
designed for dishwashers.
1.
Open the lid (
C
).
2.
Fill the dispenser (
B
) until the rinse aid
reaches the marking ''MAX''.
3.
Remove the spilled rinse aid with an
absorbent cloth to prevent too much
foam.
4.
Close the lid. Make sure that the lid
locks into position.
Fill the rinse aid dispenser
when the indicator (
A
)
becomes clear.
If you use multi-tablets and
the drying performance is
satisfactory, the rinse aid refill
indication can be disabled.
We recommend to always
use rinse aid for better drying
performance, also in
combination with multi-
tablets containing rinsing
agent.
9.
DAILY USE
1.
Open the water tap.
2.
Press the on/off button to activate the
appliance.
Make sure that the appliance is in
programme selection mode.
• If the salt indicator is on, fill the salt
container.
• If the rinse aid indicator is on, fill
the rinse aid dispenser.
3.
Load the baskets.
4.
Add the detergent.
5.
Set and start the correct programme
for the type of load and the degree of
soil.
9.1
Using the detergent
A
B
C
CAUTION!
Only use detergent
specifically designed for
dishwashers.
1.
Press the release button (
A
) to open
the lid (
C
).
2.
Put the detergent, in powder or
tablets, in the compartment (
B
).
3.
If the programme has a prewash
phase, put a small quantity of
www.electrolux.com
14
