Technical Support - DMM
87/106
599 77 23-65 Rev. 03
16.2.6 Analogue pressure switch
Remove the worktop (see relevant paragraph).
Remove the connector.
Pull out the small pipe which connects it to the pressure chamber.
Tighten the two tabs which secure it to the cabinet and remove it.
16.2.7 Detergent dispenser
Remove the worktop (see relevant paragraph).
Remove the control panel (see relevant paragraph).
Pull out the pipes that connect it to the solenoid valves (cold water and
where featured hot water).
Unfasten the two screws securing it to the central crosspiece.
Unfasten the screw in the clamp that fixes the detergent loading pipe to the
tray, and remove it from its housing.
If the appliance is a Jet System, pull out the pipe from the detergent
dispenser hook.
