5. Unscrew the lower hinge (C1). Move
the pin to the opposite side (C2).
Unscrew and move the pedal to the
opposite side (C3).
Screw on the lower hinge on the oppo-
site side.
6. Tighten the pin with the adjustment
spanner supplied.
7. Unscrew the handle. On the opposite
side remove the hole covers by driving
a 3–4 mm drift or drill into them. Install
the handle. Install the hole covers provi-
ded within the accessory bag.
C2
C3
C1
8. Raise the appliance and install the ven-
tilation grille.
9. Put the appliance in position.
Warning!
Reposition, level the
appliance, wait for at least four hours
and then connect it to the power
socket.
Do a final check to make sure that:
• All screws are tightened.
• The magnetic seal adheres to the cabi-
net.
• The door opens and closes correctly.
If the ambient temperature is cold (i.e. in
Winter), the gasket may not fit perfectly to
the cabinet. In that case, wait for the natural
fitting of the gasket.
ENVIRONMENTAL CONCERNS
The symbol
on the product or on its
packaging indicates that this product may
not be treated as household waste. Instead
it should be taken to the appropriate
collection point for the recycling of electrical
and electronic equipment. By ensuring this
product is disposed of correctly, you will
help prevent potential negative
consequences for the environment and
human health, which could otherwise be
caused by inappropriate waste handling of
this product. For more detailed information
about recycling of this product, please
contact your local council, your household
waste disposal service or the shop where
you purchased the product.
electrolux
13
