15
• If the water level in the tank is too high, the drain pump (if
present) automatically activates to empty out the excess
water.
IMPORTANT
The Manufacturer declines any liability if the
accident-prevention regulations are not respected.
E.12
“HACCP“ arrangement
The machine is arranged for the “HACCP“ connection.
Connect the “HACCP“ system to connector L3 on the base of
the machine.
F
CONTROL PANEL
F.1
Control panel description
Legend
A
= On / Off
K
= Display
I
= Wash cycle 3
D
= “Tank temperature“ indicator light
G
= Wash cycle 1
L
= Wash cycle infinite
E
= “Boiler temperature“ indicator light
H
= Wash cycle 2
M
= Drain / self-cleaning cycle
The temperature shown on the display is that of the tank if the light “D“ is on, or of the boiler if the indicator light “E“ is on. The tank
temperature is displayed during the wash cycle and the boiler temperature during the rinse cycle.
F.2
Basic Controls
Described below are all the single buttons and functions
available in the various control panel models listed above.
Some functions are common to all models of the range,
whereas others are available only on some versions.
On/Off
This button indicates equipment status: on or off. When the
equipment is on, the button indicator is lit up.
Wash cycle 1
This button starts
Wash cycle 1
. When the cycle is selected,
the button indicator is lit up. This cycle is recommended for
washing not very dirty pots.
Wash cycle 2
This button starts
Wash cycle 2
. When the cycle is selected,
the button indicator is lit up. This cycle is recommended for
washing normally dirty pots.
Wash cycle 3
This button starts
Wash cycle 3
. When the cycle is selected,
the button indicator is lit up. This cycle is recommended for
washing very dirty pots.
Wash cycle “Infinite“
This button is used to start a continuous wash that does not
stop until the operator selects an automatic cycle. This cycle is
recommended for very dirty pots with dried residuals, pots with
particular shapes or for specific user needs.
