![Electrolux EPN09C38HW User Manual Download Page 6](http://html.mh-extra.com/html/electrolux/epn09c38hw/epn09c38hw_user-manual_90308006.webp)
6 www.electrolux.com
3.
INDOOR UNIT DISPLAY
4.
REMOTE CONTROLLER
4.1
How to use the Remote
controller
1.
Keep the remote controller where its
signal can reach the receiver of the
indoor unit.
2.
When operate the air conditioner,
make sure the remote controller is
pointing to the signal receiver of the
indoor unit.
3.
When the remote controller sends out
a signal, the symbol “ ” will blink for
about 1 second in the display of the
remote controller.
4.
The indoor unit will acknowledge
the signal with beep sound when it
receives an effective signal from the
remote controller.
5.
Please press the button of the remote
controller and resend the signal if you
did not hear beep sound from the
indoor unit.
• The air conditioner will not
operate if curtains, doors or
other materials block the signals
from the remote controller to the
indoor unit.
• Prevent any liquid from falling
into the remote controller. Do not
expose the remote controller to
direct sunlight or heat.
• If the infrared signal receiver
on the indoor unit is exposed to
direct sunlight, the air conditioner
may not function properly. Use
curtains to prevent the receiver
being exposed to sunlight.
• If other electrical appliances
react to the remote controller,
either move these appliances
or consult your local dealer.
1
TEMPERATURE indication lamp
• Displays the setting/room temperature
when the air conditioner is operational.
• Displays the malfunction code when
fault occurs.
• Displays the function code when some
function is activated.
2
Signal receiver
Beeping sound is generated when a
signal from remote controller is received.
3
Wi-Fi mode lamp
Lights up when the Wi-Fi function is
setting.
4
Operation mode lamp
Lights up when the unit is working in
Cool, Heat or Dry mode.
Summary of Contents for EPN09C38HW
Page 112: ...www electrolux com shop 80327a ...