![Electrolux EOB7S01X User Manual Download Page 10](http://html.mh-extra.com/html/electrolux/eob7s01x/eob7s01x_user-manual_2383151010.webp)
5. BEFORE FIRST USE
WARNING!
Refer to Safety chapters.
Set the time before you use the oven.
5.1 Initial Cleaning
Remove all accessories and removable
shelf supports from the oven.
Refer to "Care and cleaning" chapter.
Clean the oven and the accessories
before the first use.
Put the accessories and the removable
shelf supports back to their initial
position.
5.2 Setting the water hardness
When you connect the oven to the mains
you have to set the water hardness level.
The table below shows the water
hardness range (dH) with the
corresponding Calcium deposit and the
quality of the water.
Water hardness
Calcium deposit
(mmol/l)
Calcium deposit
(mg/l)
Water clas‐
sification
Class
dH
1
0 - 7
0 - 1.3
0 - 50
Soft
2
7 - 14
1.3 - 2.5
50 - 100
Moderately
hard
3
14 - 21
2.5 - 3.8
100 - 150
Hard
4
over 21
over 3.8
over 150
Very hard
When the water hardness exceeds the
values in the table, fill the water drawer
with bottled water.
1. Take the 4 colour change strip
supplied with the steam set in the
oven.
2. Put all the reaction zones of the strip
into the water for approximately 1
second.
Do not put the strip into the running
water.
3. Shake the strip to remove the excess
of the water.
4. Wait 1 minute and check the water
hardness with the table below.
The colours of the reaction zones
continue to change. Do not check the
water hardness later than 1 minute
after test.
5. Set the water hardness: settings
menu.
Refer to the "Additional functions"
chapter, Using the settings menu.
Test strip
Water Hardness
1
2
3
4
You can change the water hardness in
the settings menu.
6. DAILY USE
WARNING!
Refer to Safety chapters.
www.electrolux.com
10
Summary of Contents for EOB7S01X
Page 54: ...www electrolux com 54 ...
Page 55: ...ENGLISH 55 ...