Electrolux EOB 53102, User Manual

Page: 6 / 24

Warning! To open the oven door,
always hold the handle in the centre.
Before using for the first time, the oven
should be heated up without food.
During this time, an unpleasant odour may be
emitted. This is absolutely normal. It is
caused by manufacturing residues.
Ensure the room is well ventilated.
1. Set the thermostat control knob to
250°C.
2. Switch the oven function control knob to
fan forced cooking
3. Open a window for ventilation.
4. Allow the oven to run empty for approxi-
mately 45 minutes.
During this time, an unpleasant odour may be
emitted. This is absolutely normal, and is
caused by residues of manufacturing.
Repeat this operation for the full grill
and
conventional cooking function for about
5-10 minutes. .
Then let the oven cool down. Then
dampen a soft cloth with warm water
and a little mild washing-up liquid and
use this to clean the oven cavity.
Before using for the first time, carefully
wash the oven accessories as well.
Operation
The timer
1 2 3
4
5
6
7
8
1
Selector button
2 Decreasing control button " - "
3 Increasing control button " + "
4 Display
5
“Cooking Duration” pilot lamp
6
“End of cooking” pilot lamp
7
“Minute minder” pilot lamp
8
“Time of day” pilot lamp
The oven will only work if the time of day
has been set. However, the oven can al-
so be operated without any programme.
In the event of a power failure, all the
settings (time of day, programme setting
or programme in operation) will be can-
celled. When the power is restored, the
numbers in the display will flash, and the
clock/timer has to be reset.
Setting the time of day
When the power supply is switched on, or
after a power failure, the “Time of day” pilot
lamp
will flash on the display.
To set the correct time of day:
1. Press button “
+ ” or “ - ”.
2. After the setting is carried out, wait for 5
seconds: the “Time of day” pilot lamp
will go out and the display will show
the set time. The appliance is ready for
use.
6 electrolux