Electrolux EKG913A2OX User Manual Download

Page: 5 / 32

•

To remove the shelf supports first pull the front of the

shelf support and then the rear end away from the

side walls. Install the shelf supports in the opposite

sequence.

•

WARNING: Use only hob guards designed by the

manufacturer of the cooking appliance or indicated by

the manufacturer of the appliance in the instructions

for use as suitable or hob guards incorporated in the

appliance. The use of inappropriate guards can cause

accidents.

2. SAFETY INSTRUCTIONS

This appliance is suitable for the
following markets: BH KW OM QA

2.1 Installation

WARNING!

Only a qualified person must

install this appliance.

• Remove all the packaging.

• Do not install or use a damaged

appliance.

• Follow the installation instructions

supplied with the appliance.

• Always take care when moving the

appliance as it is heavy. Always use

safety gloves and enclosed footwear.

• Do not pull the appliance by the

handle.

• The kitchen cabinet and the recess

must have suitable dimensions.

• Keep the minimum distance from

other appliances and units.

• Install the appliance in a safe and

suitable place that meets installation

requirements.

• Parts of the appliance carry current.

Close the appliance with furniture to

prevent touching the dangerous parts.

• The sides of the appliance must stay

next to appliances or units with the

same height.

• Do not install the appliance adjacent

to a door or under a window. This

prevents hot cookware to fall from the

appliance when the door or the

window is opened.

2.2 Electrical Connection

WARNING!

Risk of fire and electric

shock.

• All electrical connections should be

made by a qualified electrician.

• The appliance must be earthed.

• Make sure that the parameters on the

rating plate are compatible with the

electrical ratings of the mains power

supply.

• Always use a correctly installed

shockproof socket.

• Do not use multi-plug adapters and

extension cables.

• Do not let mains cables touch or

come near the appliance door or the

niche below the appliance, especially

when it operates or the door is hot.

• The shock protection of live and

insulated parts must be fastened in

such a way that it cannot be removed

without tools.

• Connect the mains plug to the mains

socket only at the end of the

installation. Make sure that there is

access to the mains plug after the

installation.

• If the mains socket is loose, do not

connect the mains plug.

• Do not pull the mains cable to

disconnect the appliance. Always pull

the mains plug.

ENGLISH

Summary of Contents for EKG913A2OX

































Search results

Summary of Contents for EKG913A2OX

Reviews:

Related manuals for EKG913A2OX

Brands by name

Popular brands

Electrolux EKG913A2OX, User Manual

Search results

Summary of Contents for EKG913A2OX

Reviews:

Related manuals for EKG913A2OX

Brands by name

Popular brands