Electrolux EKD60750 User Manual Download Page 15

Page: 15 / 72

Heat the oven emty

Keep children under supervision!
The cooker becomes very hot.
Do not forget to remove all packing
material from inside the oven.

The oven must be burnt off before it is used for
the first time. This is done as follows:

Open the oven door and remove all
the accessories from the oven cavity.

Switch on the oven

. Select hot air

by using

. Select a

temperature of 200

C. The

temperature can be changed by using

and

. The oven door must be

closed.

Leave the oven at this setting for
about one hour.

Move over to the Max. grill function

by using

. Select a

temperature of 200

C. The

temperature can be changed by using

and

. The oven door must be

closed.

Leave the oven at this setting for
about 30 minutes.

Switch off the cooker

Then leave the oven door open for
about two hours and air out the
kitchen.

Clean the oven, the door and the
oven-step units with hot water and
washing-up liquid. Dry the oven

The first time an oven is used, there may still
be a slight smell. This will not affect the
food in any way and is not a health-hazard.

Clean the accessories

Wash the shelves, roasting pan, etc. in hot
water and washing-up liquid. Rinse and dry.

Summary of Contents for EKD60750









































































Search results

Summary of Contents for EKD60750

Reviews:

Related manuals for EKD60750

Brands by name

Popular brands

Electrolux EKD60750, User Manual

Search results

Summary of Contents for EKD60750

Reviews:

Related manuals for EKD60750

Brands by name

Popular brands