Problem
Possible cause
Remedy
You can hear a constant
beep noise.
The electrical connection is
incorrect.
Disconnect the hob from
the electrical supply. Ask a
qualified electrician to
check the installation.
comes on.
The second phase of the
power supply is missing.
Check if the hob is correct‐
ly connected to the electri‐
cal supply. Remove the
fuse, wait one minute, and
insert the fuse again.
8.2 If you cannot find a
solution...
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre. Give the
data from the rating plate. Give also
three digit letter code for the glass
ceramic (it is in the corner of the glass
surface) and an error message that
comes on. Make sure, you operated the
hob correctly. If not the servicing by a
service technician or dealer will not be
free of charge, also during the warranty
period. The instructions about the
Service Centre and conditions of
guarantee are in the guarantee booklet.
9. TECHNICAL DATA
9.1 Rating plate
Model EHF6240XOK
PNC 949 492 106 02
Typ 60 HAD 54 AO
220 - 240 V 50 - 60 Hz
Made in Romania
Ser.Nr. .................
6.5 kW
ELECTROLUX
9.2 Cooking zones specification
Cooking zone Nominal Power (Max heat set‐
ting) [W]
Cooking zone diameter [mm]
Left front
2300
210
Left rear
1200
145
Right front
1200
145
Right rear
1800
180
For optimal cooking results use
cookware no larger than the diameter of
the cooking zone.
www.electrolux.com
26