background image

Problem

Possible cause

Remedy

The flame extinguishes im‐

mediately after ignition.

Thermocouple is not heat‐

ed up sufficiently.

After lightning the flame,

keep the knob pushed for

equal or less than 10 sec‐

onds.

The flame ring is uneven.

Burner crown is blocked

with food residues.

Make sure that the injector

is not blocked and the

burner crown is clean.

8.2 If you cannot find a

solution...

If you cannot find a solution to the

problem yourself, contact your dealer or

an Authorised Service Centre. Give the

data from the rating plate. Make sure,

you operated the hob correctly. If not the

servicing by a service technician or

dealer will not be free of charge, also

during the warranty period. The

instructions about the Service Centre

and conditions of guarantee are in the

guarantee booklet.

8.3 Labels supplied with the

accessories bag

Stick the adhesive labels as indicated

below:

MOD.

PROD.NO.

SER.NO

DATA

MOD.

PROD.NO.

SER.NO

DATA

MOD.

PROD.NO.

SER.NO.

03   IT

MADE IN ITALY

TYPE

IP20

0049

A

B

C

A. Stick it on Guarantee Card and send

this part (if applicable).

B. Stick it on Guarantee Card and keep

this part (if applicable).

C. Stick it on instruction booklet.

9. TECHNICAL DATA

9.1 Hob dimensions

Width

894 mm

ENGLISH

15

Summary of Contents for EGG9363NOX





















Reviews: