background image

9.3 What to do if you want to

stop using multi-tablets

Before you start using separately

detergent, salt and rinse aid, complete

the following steps:
1. Set the highest level of the water

softener.

2. Make sure that the salt and rinse aid

containers are full.

3. Start the Quick programme. Do not

add detergent and do not put dishes

in the baskets.

4. When the programme is completed,

adjust the water softener according

to the water hardness in your area.

5. Adjust the released quantity of rinse

aid.

9.4 Before starting a

programme

Before you start the selected

programme, make sure that:
• The filters are clean and correctly

installed.

• The cap of the salt container is tight.

• The spray arms are not clogged.

• There is enough salt and rinse aid

(unless you use multi-tablets).

• The arrangement of the items in the

baskets is correct.

• The programme is suitable to the type

of load and the degree of soil.

• The correct quantity of detergent is

used.

9.5 Loading the baskets

• Use the appliance to wash

dishwasher-safe items only.

• Do not wash in the appliance items

made of wood, horn, aluminium,

pewter and copper.

• Do not wash in the appliance items

that can absorb water (sponges,

household cloths).

• Remove large food residues from

dishes.

• Soak cookware with burnt-on food

before washing it in the appliance.

• Put hollow items (cups, glasses and

pans) with the opening facing

downwards.

• Make sure that glasses do not touch

each other.

• Put light items in the upper basket.

Make sure that the items do not move

freely.

• Put cutlery and small items in the

cutlery drawer.

• Move the upper basket upwards to

accommodate large items in the lower

basket.

• Make sure that the spray arms can

move freely before you start a

programme.

9.6 Unloading the baskets

1. Let the tableware cool down before

you remove it from the appliance. Hot

items can be easily damaged.

2. First remove items from the lower

basket, then from the upper basket.

After the programme is

completed, water can still

remain on the inside

surfaces of the appliance.

10. CARE AND CLEANING

WARNING!

Before any maintenance

other than running the

programme Machine Care,

deactivate the appliance and

disconnect the mains plug

from the main socket.

Make sure that the

ComfortLift basket is empty

and locked in the raised

position.

www.electrolux.com

18

Summary of Contents for EEC67300L





























Reviews: