The Fast heat up function decreases the
heat up time.
To activate the Fast heat up function
touch and hold for more than three
seconds.
If you activate the Fast heat up function,
horizontal bars on the display flash to
show that the function operates.
7. CLOCK FUNCTIONS
7.1 Clock functions table
Clock function
Application
TIME OF DAY
To show or change the time of day. You can change
the time of day only when the appliance is on.
DURATION
To set how long the appliance operates.
END
To set when the appliance deactivates.
TIME DELAY
To combine DURATION and END function.
MINUTE MINDER To set a countdown time. This function has no effect
on the operation of the oven. You can set the MI‐
NUTE MINDER at any time and also when the appli‐
ance is off.
00:00
COUNT UP TIMER To set the count up, which shows how long the appli‐
ance operates. This function has no effect on the op‐
eration of the appliance. It is on immediately when
the oven starts to heat. The COUNT UP TIMER is
not activated if DURATION and END are set.
7.2 Setting and changing the
time
After the first connection to the mains,
wait until the display shows and 12:00.
"12" flashes.
1. Touch
or
to set the hours.
2. Touch
.
3. Touch
or
to set the minutes.
4. Touch
or .
The display shows the new time.
To change the time of day touch
again and again until starts to flash.
7.3 Setting the DURATION
1. Set an oven function and
temperature.
2. Touch again and again until
starts to flash.
3. Use
or
to set the minutes for
DURATION time.
4. Touch
or the DURATION time
starts automatically after 5 seconds.
5. Use
or
to set the hours for
DURATION time.
6. Touch
. The DURATION time
starts automatically after 5 seconds.
When the set time ends, an acoustic
signal sounds for 2 minutes.
and
time setting flash in the display. The
appliance deactivates.
7. Touch a sensor field or open the
oven door to stop the acoustic signal.
8. Turn off the appliance.
www.electrolux.com
12
