Electrolux EDS805JQWA, User Manual

Page: 8 / 44

8 www.electrolux.com
DISPLAY
The display shows the following
information
After selecting a program, the
duration is displayed in hours
and minutes
(for example 3:10 which means
3 hour and 10 minutes)
The duration is calculated
automatically on the basis of the
maximum recommended load
for each type of fabric.
PROGRESS INDICATORS
6.1 DRY CYCLE IN PROGRESS
After the program has started,
the dry time remaining is updated
every minute.
6.2 COOLING CYCLE IN PROGRESS
After the drying process finish, Cooling
process will operate and switch off heater.
The Cooling indicator blink until finish cooling
process. This process will release heat from
the clothes and crease protection.
After this process finish, Machine will
show “END” and lint filter indicator
6.3 ANTI CREASE CYCLE IN PROGRESS
6
●
●
●
NOTE:
5
User can remove the clothes from
this process
6.4 EXTRA ANTI CREASE CYCLE
IN PROGRESS
This dryer can additional time for anticrease
by press and hold “TEMP” and “TIME”
2 sec, Display will show “ ” indiator and
time add for 2 hours.
This process will operate after end of
cycle to protect tangling of clothes,
After Cooling process finish and
display show “END” the indicator
“Anticrease” will show and blink
until operate end of cycle. The machine
will rotate drum clockwise and counter
clockwise around 1 hour.
User can remove clothes anytime of
this process, by open door and machine
will stop operate “Anticrease” process
●
NOTE:
Extra Anticrease User should set on
intial main program.