Electrolux EDS805JQWA, User Manual

Page: 4 / 44

4 www.electrolux.com
Never operate your dryer without the lint filter.
Do not allow lint to build around your dryer.
A torn or damaged lint filter must be replaced
immediately.
Overloading can increase lint build-up
because the airflow is reduced.
1.3 Cleaning The Lint Filter
1.4 Drying Guide
LINT BUILD-UP IS A FIRE HAZARD
A clean lint filter reduces drying times, saves
energy and avoids overheating. Overheating
may also damage your clothes.
What happens If I forget to clean the lint filter?
You must clean this lint filter after every load.
Ensure the lint filter “Clicks” when replacing.
It can be inserted into the pocket only one
way.
Permanent press and synhetics - take out
as soon as the dryer stops to reduce wrinkles.
Woollen articles - not recommended. Pull
themto their original shape, then dry them flat.
Woven and loop knit materials - may shrink,
by varying amount, depending on their quality.
Do not use the “Boost” setting for these
fabrics, Always stretch them out immediately
after drying.
Fibre or leather materials - always check the
manufacturer’s instructions.
Baby clothes and night gowns - acrylic
clothing or sleepwear use only on the “Low
Heat” setting.
Rubber and plastics
- Do not dry any items
made from or containing rubber or plastics,
such as aprons, bibs, babies’ water proof
napkins, curtains, tablecloths, shower caps,
clothes fitted with foam rubber pads, pillows,
galoshes, or rubber coated tennis shoes.
Fibreglass - not recommended, glass
particles left in the dryer could be picked up by
your clothes the next time you use the dryer
and irritate your skin.
Your load, when dry must not exceed the rated
capacity
8.0 kg for the EDV805JQWA,
EDS805KQWA, EDS805KQSA dryer
(See page 12 for a table of average weights
of laundry items)
Always check your labels for the drying
symbolwhich this international Care Labelling
Code now uses.