Electrolux EDS805JQWA, User Manual

Page: 13 / 44

13
TROUBLESHOOTING 5.
5.1 Troubleshooting
Possible Failures
Certain problems are due to lack of simple maintenance or oversights, which can be
solved easily without calling out an engineer. Before contacting your local Service Centre,
please check possible cause of malfunction and solution listed below.
Once the problem has been eliminated, press the Start/Pause button to restart the
program. If after all checks, the problem persists, contact your local Service Centre.
WARNING! Deactivate the appliance
before you do the checks.
Alarm Code:
The appliance door is open or not
closed correctly. Please check the door!
The main supply is unstable. Wait until
the main supply is stable.
No communication between electronic
elements of the appliance. Switch off
and switch on again.
the
temperature
Isolated wet spots on fabrics
after “Vapour refresh” cycle
completed.
Water pressure too low - please check that the water pressure is between
200 kPa and 800 kPa.
You have used wet clothes with “Iron Aid” option.
The "Iron Aid" program reduces wrinkle on dry laundry only. It is not a
drying program.
Clothes are slightly damp
after using “Vapour refresh”
cycle.
This is Normal. Iron Aid uses moisture to reduce the wrinkle on fabrics. It
is recommended to hang clothes after using this cycle.
If your laundry feels wet rather than slightly damp, then the household
water pressure is too high. You may need to reduce pressure by installing
a pressure reducing valve at Mains water connection to the household.
This must be done by qualified plumber.
Note: High water pressure is harmful to all appliances in your household
that are connected to the water supply ie: washing machine, dishwash-
er... etc.
No water goes out from
Nozzle, when “Vapour
refresh” cycle is selected.
The water tap is closed, please open the water tap.
The inlet hose is squashed or kinked, please check inlet hose connection.
The filter in the inlet hose is blocked, please clean the inlet hose filter.
Refer to relevant paragraph in “ Care And Cleaning” section.
The Nozzle is clogged, please contact the Service Centre.
Contact the Service Centre if you are still having problems.
Check the points listed here before you call for help, and make sure that you have followed
the Important safety Instructions on pages 3 and 4.
The appliance does not fill with water
properly.
ENGLISH