
Problem
Possible cause
Remedy
There is too much water on
the bottom of the cavity af‐
ter the end of the cleaning
function.
You sprayed too much de‐
tergent in the appliance
before the activation of the
cleaning cycle.
Cover all parts of the cavity
with a thin layer of the de‐
tergent. Spray the deter‐
gent evenly.
There is no good perform‐
ance of the cleaning proce‐
dure.
The initial oven cavity tem‐
perature of the steam
cleaning function was too
high.
Repeat the cycle. Run the
cycle when the appliance
is cold.
There is no good perform‐
ance of the cleaning proce‐
dure.
You did not remove the
side grids before the start
of the cleaning procedure.
They can transfer heat to
the walls and decrease the
performance.
Remove the side grids
from the appliance and re‐
peat the function.
There is no good perform‐
ance of the cleaning proce‐
dure.
You did not remove the ac‐
cessories from the appli‐
ance before the start of the
cleaning procedure. They
can compromise the steam
cycle and decrease the
performance.
Remove the accessories
from the appliance and re‐
peat the function.
12.2 Service data
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service
centre is on the rating plate. The rating
plate is on the front frame of the oven
cavity. Do not remove the rating plate
from the oven cavity.
We recommend that you write the data here:
Model (MOD.)
.........................................
Product number (PNC)
.........................................
Serial number (S.N.)
.........................................
13. ENERGY EFFICIENCY
13.1 Product Fiche and information according to EU 65-66/2014
Supplier's name
Electrolux
Model identification
EB6SL70KCN
EB6SL70KSP
EB6SL7KCN
EB6SL7KSP
www.electrolux.com
54
Summary of Contents for EB6SL70KCN
Page 1: ...EB6SL70KCN EB6SL70KSP EB6SL7KCN EB6SL7KSP EN Steam oven User Manual ...
Page 57: ...ENGLISH 57 ...
Page 58: ...www electrolux com 58 ...
Page 59: ...ENGLISH 59 ...