7.2 Setting the clock functions
Before you use the
functions: Duration, End
Time, you must set a heating
function and temperature
first. The oven turns off
automatically.
You can use the functions:
Duration and End Time at
the same time if you want to
automatically turn on and
turn off the oven on a given
time later.
1. Set a heating function.
2. Press again and again until the
display shows the necessary clock
function and the related symbol.
3. Press
or
to set the necessary
time.
4. Press to confirm.
When the time ends, a signal sounds.
The oven turns off. The display shows a
message.
5. Press any symbol to stop the signal.
7.3 Heat + Hold
Conditions for the function:
• The set temperature is more than 80
°C.
• The function: Duration is set.
The function: Heat + Hold keeps
prepared food warm at 80 °C for 30
minutes. It turns on after the baking or
roasting procedure ends.
You can turn on or turn off the function in
the menu: Basic Settings.
1. Turn on the oven.
2. Select the heating function.
3. Set the temperature above 80 °C.
4. Press again and again until the
display shows: Heat + Hold.
5. Press to confirm.
When the function ends, a signal sounds.
The function stays on if you change the
heating function.
8. AUTOMATIC PROGRAMMES
WARNING!
Refer to Safety chapters.
8.1 Recipes with Recipe
Automatic
This oven has a set of recipes you can
use. The recipes are fixed and you
cannot change them.
1. Turn on the oven.
2. Select the menu: Recipes. Press
to confirm.
3. Select the category and dish. Press
to confirm.
4. Select a recipe. Press to confirm.
When you use the function:
Manual, the oven uses the
automatic settings. You can
change them as with other
functions.
9. USING THE ACCESSORIES
WARNING!
Refer to Safety chapters.
9.1 Inserting the accessories
Use only suitable cookware and material.
WARNING!
Refer to "Hints and tips"
chapter, Microwave suitable
cookware and materials.
Wire shelf:
Push the shelf between the guide bars of
the shelf support and make sure that the
feet point down.
ENGLISH
15
