To turns off the Microwave
function, press .
If you press or open the
door, the function stops. To
start it again, press .
6.8 Setting the Combi function
1. Turn on a heating function. Refer to
"Setting a heating function".
2. Press and do the same steps as
when you set the Microwave
function.
For some functions the
microwave will start as soon
as the set temperature is
reached.
Functions not available for the Combi
function: Favourites, End Time, Set +
Go, Heat + Hold.
6.9 Setting the Quick Start
function
1. If necessary, press to turn off the
oven.
2. Press to turn on the Quick Start
function.
Each press of adds 30 seconds to the
Duration time.
You can change the
microwave power (refer to
"Setting the Microwave
function").
3. Press to set the time for the
function: Duration. Refer to "Clock
functions" chapter, Setting the clock
functions.
6.10 Heat-up indicator
When you turn on a heating function, the
bar on the display comes on. The bar
shows that the temperature increases.
When temperature is reached the buzzer
sounds 3 times and the bar flashes and
then disappears.
6.11 Residual heat
When you turn off the oven, the display
shows the residual heat. You can use the
heat to keep the food warm.
7. CLOCK FUNCTIONS
7.1 Clock functions table
Clock func‐
tion
Application
Minute
Minder
To set a countdown
(max. 2 h 30 min).
This function has no
effect on the operation
of the oven. You can
also turn it on when
the oven is turned off.
Use to turn on the
function. Press
or
to set the minutes
and to start.
Duration To set how long the
oven works (max. 23 h
59 min).
Clock func‐
tion
Application
End Time To set the switch-off
time for a heating
function (max. 23 h 59
min).
If you set the time for a clock function,
the time starts to count down after 5
seconds.
If you use the clock
functions: Duration, End
Time, the oven turns off the
heating elements after 90 %
of the set time. The oven
uses the residual heat to
continue the cooking
process until the time ends
(3 - 20 minutes).
www.electrolux.com
14
