48
This setting allows to enable / disable (
/
) the MultiTimer
feature and its advanced parameters:
• Enable advanced MT. It allows MultiTimer advanced feature
to show up on the display.
• Enable MT programs. It allows MultiTimer programs to
show up on the display.
• Enable temperature recovery. It allows the oven to recover
the temperature inside the cavity.
•
MultiTimer presets
– Enable Presets save. It allows “save preset“ function to
be shown on the display.
– Enable Presets modify. It allows “modify preset“ function
to be shown on the display.
– Enable Presets delete. It allows “delete preset“ function
to be shown on the display.
SkyHub favorite Mode (Homepage/SoloMio
)
This setting allows to enable / disable (
/
) the Homepage
Mode (SkyHub/SoloMio).
Cleaning
This setting allows to enable / disable (
/
) the following
parameters:
Default cycle
• This activation allows single cleaning programs to show up
on the display.
Default Chemical
• This activation allows choose between the solid or the
powder detergent format.
Advanced functions
• Forced cleaning after 00:00 (H: M) of cooking. This
activation allows the oven to perform a forced cleaning
after a set time. Set the required time
Green Spirit/Economizer
This setting allows to enable / disable (
/
) the “Saving
options“:
Cleaning
• Skip rinse-aid and boiler descale. It allows to skip the rinse
aid phase and descale the boiler
• Skip drying phase. It allows to skip drying phase.
• Time to save. It allows to shorten the cleaning time.
Accessories
This setting allows to: enable / disable (
/
) the following
feature/options:
Usb food probe
Cleaning with Liquid chemicals
Cleaning with Enzymatic chemicals
Grease collector
Wi-Fi
This setting allows to:
• enable / disable (
/
) the Wi-Fi connection;
• enable / disable (
/
) the automatic connection;
• select active networks
• update networks
When the network is not connected, select “Active networks”
and after “bbb” (e.g.).
Identity Card
It shows the latest uploaded software version.
Service
This settings is only allowed to an authorized technician.
F
MACHINE CLEANING AND MAINTENANCE
Refer to “
WARNING and Safety Information
F.1
Ordinary maintenance
F.1.1
Informations for maintenance
Routine maintenance operations can be carried out by non-
specialised personnel, carefully following the instructions
given below.
NOTE!
The manufacturer declines any liability for opera-
tions carried out on the machine without following
these instructions.
IMPORTANT
Pay attention to the selection and use of cleaning
products in order to maintain proper appliance
performance and safeness.
aaa
ccc
bbb
ddd
Active networks
Update networks
WiFi
WiFi connection
Autoconnect
No network connection
Active networks
Update networks
WiFi
WiFi connection
Autoconnect
bbb
SETTINGS
SERVICE
SETTINGS
SERVICE
ID
