For correct operation, the oven cabinet
must have a minimum opening of 130
cm² in the front or on the sides (a
minimum of 65 cm² for each side). The
manufacturer recommends a 130 cm²
opening in the front for a brick cabinet
and a 65 cm² opening for each side for a
wooden cabinet.
When you install a hob above the oven,
make different electrical connections for
the hob and for the oven.
Only make connections with correct
cables for the power supplied.
Make sure that after the
installation there is easy
access to the appliance if
repairs or maintenance are
necessary.
12.7
Securing the appliance to
the cabinet
A
B
12.8
Electrical installation
The manufacturer is not
responsible if you do not
follow the safety precautions
from the Safety chapters.
This appliance is supplied only with a
main cable.
12.9
Cable
Cable types applicable for installation or
replacement:
H05 V2V2-F (T90), H05 BB-F
For the section of the cable refer to the
total power on the rating plate. You can
also refer to the table:
Total power (W)
Section of the ca-
ble (mm²)
maximum 1380
3 x 0.75
maximum 2300
3 x 1
maximum 3680
3 x 1.5
The earth cord (green / yellow cable)
must be 2 cm longer than phase and
neutral cables (blue and brown cables).
13.
TECHNICAL DATA
13.1
Technical data
TOTAL POWER:
Electric:
0.07 kW
Gas original:
G20 (2H) 20 mbar = 2.6 kW
Gas replacement:
G30/G31 30/30 mbar = 196 g/h
G30/G31 30/30 mbar = 2.7 kW
Electric supply:
220 - 240 V ~ 50 - 60 Hz
Appliance category: II2H3B/P
Gas connection:
G 1/2"
Appliance class:
3
www.aeg.com
22
