Electrolux 520003, Instruction Manual

Page: 11 / 47

4
other than those designated in the Manual
(use and installation of non-genuine spare
parts will have adverse influence on
machine operation);
⚫
The machine is operated by a
non-professional technician;
⚫
Unauthorized modification and operation;
⚫
Improper maintenance
⚫
Improper use of machine
⚫
Unexpected unusual incident
⚫
The machine is used by an operator who is
not familiar with machine and not trained.
⚫
Failure to follow applicable HSE regulations
for workspace of the country where the
machine is installed.
The manufacturer will bear no responsibilities for
damage due to user's or customer's modification
or alteration or change without authorization.
The employer or manager on jobsite will be
responsible for determination and selection of
proper personal protective devices for operator
according to applicable regulations of the
country where the machine is installed.
Electrolux (Shanghai) Professional Appliance
Co., Ltd. will bear no responsibility for possible
inaccurate description in the Manual arising from
incorrect printing or translation.
Any supplementary information received by the
customer from the manufacturer must be kept
with the Manual, which is integral part of the
Manual.
A8 Personal Protective Equipment
The personal protective equipment (PPE) to be
used in the whole machine lifetime is
summarized as follows.
(1) Heat resistant gloves suitable for keeping in
contact with water and substances involved
(see the Material Safety Data Sheet for other
possible PPE).
There will be possible risk of exposure to
chemicals and possible health injury if an
operator, professional technician or user fails to
use correct personal protective equipment.
A9 Keeping Manual
The Manual must be kept with care in the whole
machine lifetime until decommissioning.
The Manual must be kept together with the
machine and consigned to the new operator in
the event that the machine is transferred, sold on,
rented, approved for use or lease, etc.
A10 Use of Manual
The Manual is used for:
⚫
Carrier and handling operator
⚫
Installer and start-up operator
⚫
Employer and manager on jobsite of
machine operator
⚫
Operator responsible for normal use of
machine
⚫
Professional technician - technical assistant
(see wiring diagram and service manual)