Electrolux Professional WB5130H, User Manual

Page: 13 / 20

User manual
13
Auto restarts
Select
AUTO RESTARTS
and activate.
Set the number of automatic restarts that the machine will perform of the selected program.
Press the control knob / start button to confirm the settings.
4.5 When program has ended
When a program has finished, the indicating lamp on the clean side will show when the clean side unloading door
can be opened.
The clean side unloading door will only unlock when a program has been successfully completed. If the program has
been rapid advanced or an error has occurred, the machine control system will unlock the dirty side loading door.
Then the outer loading door has to be opened and closed again and a program has to be run again in order to secure
the wash process*.
Open the clean side unloading door and empty the machine.
Close the clean side unloading door.
The clean side unloading door is now locked and the dirty side loading door can be opened.
* This is the case for all programs including sluice programs and rinse + extra programs. Sluice, drum rinse and ma-
chine clean programs can be programmed to open the dirty side loading door after completed programs.
Opening the unloading door after a sluice program presents cross contamination issues. The load might not be hy-
gienically clean after only a sluice program. Therefore it is recommended to add a sluice step to a "normal" program
when required as opposed to using a sluice program alone.