26
G.7.2
Side cover without overhang
The side cover should only be used as a closing off against the wall, against a niche and in between appliances (provided that these
have the same dimensions). Standard cover has pre-cuts that you can adapt to the appliances according to the left/right side.
Fit the 4 cage nuts
A
into the dedicated slots on the
frame.
Attach connecting rails
C
and
D
with the supplied
screws
B
.
Make sure marking on part
C
on the rail is pointing
forwards.
Bring the side panel
E
into position.
Insert the hooks on the bottom of end rail
F
into the
eyelets of the connecting rail.
Attach the side of side cover
E
using the 4 flathead
screws supplied.
Slide end rail
F
in the direction of the arrow to align
it to the front.
G.7.3
Sealing
For hygiene reasons, to prevent water and other substances
from running under the appliance, seal all around the joints
between the appliance and the wall or floor with permanently
elastic silicone.
1
2
A
B
C
D
E
3
4
F
E
F
