Electrolux Professional IB42310, Installation Manual

Page: 11 / 24

Installation manual
11
1. Remove the 2 fixing screws (1 screw by casing) which fix the machine to the transport pallet and unload the machine.
2. Install the ironer in an area where it is easily accessible by both operators and service technicians.
Make sure that the side of the machine is at least 100 cm away from walls or other machines.
In addition, leave a minimum of 10 cm between the machine and any rear wall.
3. Install the four adjustable feet and counternuts delivered with the machine as shown on the Fig. 3 below.
Place the machine on a perfectly stable and level floor. Check the horizontality of the machine using a spirit level
at both its centre and ends.
If required, use the adjustable feet to level the machine then lock with counternuts.
Control the floor space (E) between the two casings in order for the treadle to move correctly.
Control manually the functioning of the pedal which has to move freely with no jamming.
8 Working place lighting
The lighting should be designed so as to avoid eye strain for the operator ; it should be uniform without any glare,
and should be sufficient to detect any hazards.