Electrolux Professional 603877, Installation And Operating Manual, Page: 44 / 46

44
Anomaly Anomaly type Description Possible causes Actions
Lid conduit: too
rigid or damaged. Warning The flexible tube con-
necting the upper
plate wiring is exces-
sively rigid or shows
damages. Conduit rigidity increases
because of the upper plate
wires twisted too many
times in the same direction
while cleaning the upper
plate.
Damages will occur con-
sequently to the increased
rigidity.
1. Set free the upper plate as
for cleaning routine;
2. Find the correct twisting
direction for restoring the
original flexibility of the
conduit;
3. In case of conduit damages,
call service and report
findings.
Dirt Filters Warning The air filters show
traces of dirt / dust /
grease / debris: risk
of overheating High duty cycle and pollu-
tion from the room.
1. Remove the dirt using a
rag;
2. Remove the grease from
the louvers surface using a
rag soaked with degreaser;
3. Remove dust using a
vacuum cleaner;
4. Call Service and report the
above: filters replacement
may be needed.
N APPLIANCE DISPOSAL
N.1 Procedure regarding appliance disposal
At the end of the product's life-cycle, make sure it is not
dispersed in the environment.
Different regulations are in force in the various countries,
therefore comply with the provisions of the laws and compe-
tent bodies in the country where appliance disposal takes
place.
The appliance's parts must be disposed of in a differentiated
way, according to their different characteristics (e. g. metals,
oils, greases, plastic, rubber, etc.).
Before disposing of the appliance, make sure to carefully
check its physical condition, and in particular any parts of the
structure that can give or break during dismantling.
The symbol on the product indicates that this
product should not be treated as domestic
waste, but must be correctly disposed of in
order to prevent any negative consequences
for the environment and human health. For
further information on the recycling of this
product, contact the local dealer or agent, the
Customer Care service or the local body
responsible for waste disposal.
NOTE!
When dismantling the appliance, any marking, this
manual and other documents concerning the appli-
ance must be destroyed.