Electrolux Professional 603877, Installation And Operating Manual, Page: 32 / 46

32
J.3 Replace the Removable Teflon Plate
1. Just release the 4 clips and remove the RTP, replace it.
2. Place the replaced RTP on the clean upper plate with the
grooves in the same direction and secure it with the 4 clips.
NOTE!
Make sure to fix the RTP only when the upper
heating plate is clean.
IMPORTANT
It is advisable to purchase 2 RTPs in order to have
one always available for immediate replacement if
the other is worn from use.
J.4 Fix the upper plate in the lid
1. Fit back the upper plate in the lid respecting right position
of the upper heating plate. Have high care not to turn the
upper heating plate that would provoke flexible hose
damages (the symbols must be in the front).
2. Guide the flexible tube to avoid damages.
A segment is permanently marked along the length of the
tube: be sure to keep this segment in a straight line to
ensure proper repositioning of the top plate and to avoid
damaging the tube and wiring.
K APPLIANCE CLEANING
K.1 Cleaning introduction
WARNING
Use heatproof gloves when
operating with hot parts.
In order to reduce the environmental impact of pollutants it is
advisable to clean the appliance (externally and, where
necessary, internally) with products that are more than 90%
biodegradable.
CAUTION
• Do not use solvent-based detergents
(e. g. trichloro-ethylene) or abrasive
powders for cleaning.
• Do not use chemical products such as
sodium hypo chlorite (bleaching
powder), hydrochloric acid (muriatic
acid) or other acids to clean the surfa-
ces of the appliance.
Do not use the above products even for
cleaning zones next to the appliance,
their vapours can damage it.
• Do not use steel brushes, steel wool,
copper cloths, sand-based or similar
products for cleaning.
• Do not use any razor blade or metallic
tool on the tray (if present) and glass,
they will be damaged.
WARNING
When using chemicals, comply
with the safety notes and dosage
recommendations printed on the
packaging. Refer to the chapter
A.2
Personal protection equip-
ment for handling chemical
products.
IMPORTANT
• While using the appliance grease and carbon
deposit can be burnt by the microwave; remove
all the debris in the cooking area, risk of lighting!
• Never immerse cords, plugs or appliance in
water.
K.2 External cleaning
NOTE!
To easily clean the appliance, remove the dirty
when it has just formed.
• Clean both sides and the rear of the appliance. Take care
not to introduce water into the appliance through the
openings.
• In case of encrusted dirt, grease or sandwich residue, use a
cloth/sponge wiping with the grain of the satin finish and
rinse often.
• Rubbing in a circular motion combined with the particles of
dirt on the cloth/sponge could damage the steel’s satin
finish.
3
4
1
2
1
2
1
4
3
4
FRONT
FRONT
click!