I N S T A L L A T I O N I N S T R U C T I O N S
PART NO. ELESAM42-SM
©2002
Printed in USA 08-02
ELESAM42-SM
Static Wall Mount
Prior to assembly, unpack carton completely and
verify contents. If you are missing any of the
following components, please contact Technical
Support at 1-800-776-5768.
(1) BRACKET, PLASMA MOUNTING, STATIC
(6) SCREWS, M8 X 35MM BUTTON HEAD CAP
(6) MOUNTING BUTTONS, NYLON STEPPED, PAN STYLE
(1) ALLEN KEY, 5MM
(2) LATCHING FLAG
(2) 10-24 X .5 FH UNDERCUT SCREW
(2) NYLON WASHER
(2) 10-24 NYLOCK NUT
READ INSTALLATION INSTRUCTIONS COMPLETELY BEFORE PROCEEDING
Figure 1
CAUTION:
PLASMA DISPLAYS ARE EXTREMELY FRAGILE!
Mounting Button
Locations
10-24 x .5 FH
Undercut Screw
Nylon Washer
between flag & mount
Latching Flag
(Note outer
hole location)
10-24 Nylock Nut
installed from underside
Figure 3
1. Attach four mounting buttons to plasma using four M8 x 35mm button head cap screws
provided (see Figure 2
).
Figure 2
2. Secure two latching flags to Plasma Static Mount using one 10-24 x .5 FH Undercut
Screw, one Nylon Washer, and one 10-24 Nylock Nut for each flag (See Figure 3).
