ELECTROCOMPANIET ECM 1 MKII Page 17 Owner'S Manual Download

Page: 17 / 20

TECHNICAL SPECIFICATIONS ECM 1 MKII

The following technical data were measured on randomized test objects and are

typical data. All measurements are made at 120V / 240V // 50Hz / 60Hz.
Clipping point of the amplifier is set to a level where total harmonic distortion (THD) is 0.2 %

Preamplifier section

Noise floor (1Vrms, 20 - 20 kHz, balanced). < -145dB

Frequency responce: 0.5 - 48 kHz

THD + N: < 0.0005%

DAC section

• Upsampling rate: 192 kHz, 24bit

• Digital/Analog Conversion: 192 kHz, 24 bit

Input sampling rate:

• 2x TosLink SPDIF - 192 kHz, 24 bit

• 2x Coax SPDIF - 192 kHz, 24 bit

Streamer section

• Network connection: Wi--Fi or LAN

• Advanced 802.11 AC WiFi with MIMO

• 1x Gigabit Ethernet (1000Mbps)

• 1x USB for external storage

• 1x SPDIF Coax output

• iOS, Android and Web app

Streaming services

• Airplay

• Spotify Connect

• TIDAL

• Qobuz

• Bluetooth

• Internet Radio

• DLNA as renderer

Internal drive: Docking, self installation .5”/2.5” - unlimited capacity.

Number of channels: 2 ch

Dimensions

Width: 470 mm - 18.5 inches

Depth: 381 mm - 14.99 inches

Height: 80 mm - 3.14 inches

Weight: 8.3 Kg - 18 lbs

*(without internal drive)

*Specifications are subject to change without notice.

Summary of Contents for ECM 1 MKII





















Search results

Summary of Contents for ECM 1 MKII

Reviews:

Related manuals for ECM 1 MKII

Brands by name

Popular brands

ELECTROCOMPANIET ECM 1 MKII, Owner'S Manual

Search results

Summary of Contents for ECM 1 MKII

Reviews:

Related manuals for ECM 1 MKII

Brands by name

Popular brands