Quick Setup
The ZLX series loudspeakers from are fully integrated audio systems with carefully matched
electronics and transducers. These products make it easy to setup a high quality sound system
quickly with a minimum amount of cables and external electronics.
Full-Range powered loudspeaker
Models: ZLX-12P and ZLX-15P
To set up a full-range powered loudspeaker, do the following:
Step
Illustration
1.
Connect the AC power cord from a
grounded line receptacle to the MAINS
IN.
2.
Connect the 3.5 mm mini jack, XLR or
TRS cable from an audio source to AUX
IN, INPUT 1 or INPUT 2.
3.
Adjust the input gain to
(infinity).
INPUT
1
4.
Switch POWER to ON.
5.
From the DSP home screen, increase the
input gain to the desired signal level.
6.
Adjust the MASTER VOL knob to the
desired volume.
See also
•
3.2
en
9
Electro-Voice
User Manual
2015.12 | 02 | F.01U.319.253
