background image

Eliminator ii

Two-way High-output

Stage System

General Product Description

The Electro-Voice

®

 Eliminator ii

 is a high-peak output, high-

efficiency two-way stage system. The dual 15 in. low-frequency/
horn-loaded constant-directivity high-frequency system incorporates
elements of Ring-Mode Decoupling (RMD

). RMD techniques

substantially improve vocal fundamental intelligibility and produce
an “up front” tonality capable of cutting through even the most difficult
acoustic environments.

The Eliminator ii

 enclosure has a unique design that presents a

very minimal frontal cross section while still maintaining substantial
internal volume. A newly developed handle concept allows for
extremely comfortable transportation from any orientation. The
design is lightweight, but very rugged and features a heavy metal
grille and highly stylized corner protection.

The heart of the Eliminator ii

 ‘s high performance design is the

combination of a high-excursion low-frequency suspension system
with Electro-Voice’s unique Ring-Mode Decoupling. All loudspeaker
drivers exhibit mechanical resonance modes that add their own
time-domain or ringing-mode colorations. These colorations limit
and reduce overall system intelligibility. The Eliminator ii

 uses RMD

to control several fundamental ringing modes. The result is
substantially improved vocal range intelligibility and system
“openness”.

Two 15 inch drivers provide very high output at the lower frequencies.
When extended high output low-frequency operation is required,
performance can be further enhanced by biamping the Eliminator
ii

 with the Eliminator i

 Sub. Vented enclosures offer excellent power

handling and low distortion in the lowest octave of rate operation.
However, it is always advisable to filter material below enclosure
tuning to further improve system output and headroom. The
Eliminator ii

 should be high-pass filtered to reduce subsonic

material below 40 Hz.

Architects’ and Engineers’ Specifications

The loudspeaker system shall consist of two 38.1-cm (15 inch)
low-frequency tranducers in a vented enclosure. The high-frequency
section shall be a compression driver with a pure titanium diaphragm
coupled to a 1-inch throat diameter to a constant-directivity horn
having a horizontal included angle (referenced to –6 dB) of 60° and
a vertical included angle of 40° nominal. The loudspeaker shall
have a rated frequency response of 50 Hz to 20 Hz ± 3 dB and a
long-term rated average power handling of 600 watts (EIA RS-426-
A). The system sensitivity shall be 100 dB when measured in an
anechoic environment with a 1-watt input with a calibrated
measurement microphone located 1 meter from the system axis.
The nominal impedance shall be 4 ohms. The system shall have
parallel Neutrik

®

 NL4MP connectors.

Specifications:

Frequency Response, Measured at 10 feet on axis
(normalized to 1 watt/ 1 meter):

.............................................................. 50 - 20,000 Hz ±3 dB

Long-Term Average Power Handling, EIA Standard RS-426-A:

................................................................................. 600 watts

Sound Pressure Level, 1 W/1 m: ..................................... 100 dB

Dispersion Angle Included by 6-dB Down Points:

Horizontal: ........................................................................ 60°
Vertical: ............................................................................. 40°

Transducer Complement:

High Frequency:

DH2010A
HP64M constant directivity

Low Frequency:

2x DL15BFH

Enclosure Tuning: ................................................................ 46 Hz

Crossover frequency LF/HF: .......................................... 1600 Hz

Impedance:

Nominal ...................................................................... 4 ohms
Minimum .................................................................. 3.3 ohms

Input connectors:

Parallel Neutrik

®

 model NL4MP

Enclosure Finish: .................................................. Black carpeted

Dimensions,

Height: ...................................................... 46 in. (116.84 cm)
Wide: ........................................................ 17.4 in. (44.20 cm)
Depth: ......................................................  24.25 in. (61.6 cm)

Net Weight: ....................................................... 119 lbs (53.98 kg)

Shipping Weight: .............................................. 129 lbs (58.51 kg)

Supporting Products

Eliminator i

 Sub

Eliminator i

 Amplifier

KEY FEATURES

Dual 15 inch Two-way High-output Stage
System.

600 watt continuous

RMD

™ 

 for Improved Clarity and Presence

Reviews: