8
en | Installation and wiring
EVID Surface Mount S Series - X Models
2022-03 | 07 | F.01U.345.358
Installation Manual
Electro-Voice
3
Installation and wiring
3.1
Installing the speaker
For safety, ensure the mounting surface supports more than the weight of the speaker. Use
only industry-accepted fasteners and mounting methods when mounting the U-Bracket.
Consult an expert if you are unsure.
!
Warning!
Use a support system which has sufficient wind load strength to comply with the applicable
codes and standards.
Disregarding this warning could result in damage to the product and major injury or possibly
death may occur.
!
Caution!
It is the installer's responsibility to determine and use the proper mounting hardware for the
wall construction type.
Disregarding this caution could result in damage to the product and personal injuries may
occur.
i
Notice!
Connections shall not be made with rigid conduit but with flexible conduit or wiring only.
Installing the U-Bracket
To
install the U-bracket
, do the following:
1.
Draw a level
line
.
2.
Align
screw holes
on the level line.
3.
Install
two mounting screws
to secure the U-Bracket to the wall.
Installing the speaker
To
install the speaker
, do the following:
1.
Wire the
speaker
, as shown in the wiring section.
