Suspending an EVC loudspeaker using M10 suspension points
EVC loudspeakers must be hung in an inverted orientation when suspended from the insert
points. The trapezoidal enclosures require attachment to three points. The subwoofer requires
attachment at four points. It is not possible to suspend EVC speakers horizontally. A safety
cable should always be attached to one of the suspension points.
EVC loudspeakers are designed to be installed individually. There are no factory-approved
accessories for creating clusters by connecting an EVC loudspeaker to any other loudspeaker.
Figure 4.3: Suspending EVC systems, including a safety cable
Eyebolt accessory kits
EVC loudspeakers do not ship with eyebolts. To suspend the speaker, it is necessary to order
one of the accessory eyebolt kits (sold separately).
▪
EBK-M10-3PACK: optional eyebolt kit, consisting of three M10 shoulder eyebolts and
three fender washers, used when eyebolts are needed to suspend any of the full-range
EVC loudspeakers. For more information see, EBK-M10 Eyebolt Attachment Kit
Installation Instructions (F.01U.303.870).
▪
EBK-M10-4PACK: optional eyebolt kit, consisting of four M10 shoulder eyebolts and four
fender washers, used when eyebolts are needed to suspend any of the full-range EVC
loudspeakers or the EVC-1181S subwoofer. For more information see, EBM-M10-4PACK
M10 Eyebolt Attachment Kit Installation Instructions (F.01U.349.930).
Installing the eyebolts
!
Caution!
No eyebolt should be mounted in the sides of an EVC enclosure in order to suspend a system.
Doing so may result in damage to the enclosure, leading to installation failure, and personal
injury.
Figure 4.4: Eyebolts installed incorrectly in the sides of an enclosure in order to suspend it from above
4.5.3
EVC Compact Front-Loaded Loudspeakers
2018.01 | 01 | F.01U.345.998
Installation manual
Electro-Voice
