8
14.
DAMPING FACTOR
- internal
>300
-
internal with f = 1 kHz
15. SLEW RATE
>35 V/µs
- internal
16.
Factory Defaults
•
Caution:
make sure to ckeck these settings:
Function
Location
Control
State
Setting
Input Sensitivity L & P
86208/86212
Jumper J11/J21
plugged in
0 dBu
Limiter Off Switch
86208/86212
S102
open
Limiter on
Limiter Service
86208/86212
S101 / S201
open
Fan Service
86208/86212
S001
open
Input Routing
rear panel
slide switch
Dual/Stereo
Dual Mode
HI/LO-Cut Filter
rear panel
slide switch
on
Filter on
Bridged Mode
rear panel
slide switch
Normal
Dual Mode
Limiter
rear panel
slide switch
Slow
Limiter slow
CIR.GND to Chassis
rear panel
slide switch
Grounded
•
Caution:
With the CPS-units it is important to make sure that the THX-covers are screwed-on to the
level controls and that the controls are set to their fully clockwise position.