Electro Industries/GaugeTech ProtoCom Installation & Operation Manual Download Page 51

Page: 51 / 118

Electro

Industries/GaugeTech

™

Powered by Innovation™

Doc

E204701

2-21

2: Using the ProtoCom/ProtoCom-Lon

2.10.2: Set Up a Password

The ProtoCom/ProtoCom-Lon comes with password disabled, but you can easily
configure a password for it.

There are 2 password access levels:

• Admin: the Admin account has unrestricted access to the unit.

• User: the User account can view any ProtoCom/ProtoCom-Lon information, but

cannot make any changes to settings or restart the unit.

1. Type the IP address of the ProtoCom/ProtoCom-Lon into your PC’s browser.

2. From the Web Configurator landing page, click the Diagnostics & Debugging button

on the bottom right side of the page to access the FST Web Configurator.

Click this button

Summary of Contents for ProtoCom























































































































Search results

Summary of Contents for ProtoCom

Reviews:

Electro Industries/GaugeTech ProtoCom, Installation & Operation Manual, Page: 51 / 118

Search results

Summary of Contents for ProtoCom

Reviews: