FLANGER HOAX
-OPERATING INSTRUCTIONS-
Congratulations on your purchase of the Electro-Harmonix Flanger Hoax! The Flanger Hoax
is one of the most powerful modulation instruments ever designed. From shimmering static
and active phasing to frequency adjustable flanging, you will find an exciting new palette of
textures at your fingertips. The sheer number of variations available through both familiar
and advanced modulation controls will present you with the ability to creatively shade as well
as wildly animate your music in a way that really was never before possible at this price
level. Your own creativity is your only limitation.
Connect your instrument or mixer’s Effects Send Output to the Flanger Hoax’s Input jack,
and run a second cable from any or all of the three main outputs (Direct out, Blended out or
Effect out). You will learn which outputs will serve your purposes the best in different
situations. Hit the true bypass footswitch to activate, and get ready for a magically ethereal
treat.
Please take a few minutes to familiarize yourself with the Flanger Hoax controls and how
they work.
- BACKGROUND-
The Flanger Hoax is made up of two separate phaser sections and their associated Delay
Lines. The phaser sections are the Fixed Phaser and Swept Phaser. The Fixed Phaser will
shift the phase of your input signal by a set amount of 240o. The Swept Phaser is more like
a traditional phaser, modulated by a low frequency sine wave called the Modulator. Each
phaser circuit is followed by its own analog delay line, each of which can also be
independently swept by the Modulator. Each phaser section can be bypassed to access the
delay lines without any phase shift. To top it all off, there is a Feedback control that allows
you to send the wet output of the pedal or the output of the Swept Phaser back into the
phaser circuits.
- CONTROLS -
1. BLEND Knob: Mixes between the effect and the dry signal. The counter-clockwise position
is all dry, while the clockwise position is all effect. The result of the BLEND Control goes out
the BLENDED OUTPUT Jack.
2. FEEDBACK CONTROLS:
FEEDBACK Knob: Sets the amount of signal that is fed back into both phase shift circuits.
The counter-clockwise position gives you no feedback; the clockwise position yields
maximum feedback.
WET Toggle Switch Position: In the WET position, the wet signal (which is at the EFFECT
OUTPUT Jack) is fed back to the phaser circuits.
OFF Toggle Switch Position: All feedback is turned off, no matter where the FEEDBACK knob
is set.
SWPT Toggle Switch Position: In the SWPT Position, the output of the Swept Phaser is fed
back into the Phaser circuits.
3. SWEPT PHASER CONTROL:
AMOUNT Knob: Controls the amount of modulation that sweeps the Swept Phaser. In the
counter-clockwise position, there will be no modulation. In the clockwise position you will
have maximum modulation. The total phase shift range of the Swept Phaser is 240o to 990o.
WARNING:
Use only the 18VDC/500mA AC adapter supplied with the FLANGER HOAX. Do
not use any other AC adapters. Using other AC adapters, even those made by Electro-
Harmonix, could cause harm to the unit, the adapter or you. The FLANGER HOAX does not use
batteries.