background image

EN - 15

7  BEFORE  CALLING  AFTER-

SALES SERVICE

Your fridge is not operating

Check if:

• 

There is power

• 

The plug is correctly connected to the 

socket

• 

The plug or mains fuse has blown

•  The socket is faulty. Examine this by 

plugging your fridge into a working 

socket.

The appliance performs poorly

Check if:

• 

The appliance is overloaded

• 

The doors are closed properly

• 

There is any dust on the condenser

• 

There is enough space near the rear and 

side walls.

Your fridge is operating noisily

Motor noise: 

Indicates the compressor 

is operating normally. The compressor 

may cause more noise for a short time 

when it is first activated.

Bubbling noise and splash: 

Due to 

the flow of the refrigerant in the tubes of 

the system.

Air blowing noise: 

Indicates normal 

operation of the system due to the 

circulation of air.

There is a build-up of humidity inside 

the cooler

Check if:

• 

All food is packed properly. Containers 

must be dry before being placed in the 

fridge.

• 

The fridge door is opened frequently. 

Humidity of the room enters the fridge 

when the doors are opened. Humidity 

increases faster when the doors are 

opened more frequently, especially if the 

humidity of the room is high.

The door is not opening and closing 

properly

Check if:

• 

There is food or packaging preventing the 

door from closing

• 

The door compartments, shelves and 

drawers are placed properly

• 

The door joints are broken or torn

• 

Your fridge is level.

Recommendations

• 

If the appliance is switched off or 

unplugged, wait at least 5 minutes before 

plugging the appliance in or restarting 

it in order to prevent damage to the 

compressor.

• 

If you will not use your fridge for a long 

time (e.g. in summer holidays) unplug it. 

Clean your fridge according to chapter 

cleaning and leave the door open to 

prevent humidity and smell.

• 

If a problem persists after you have 

followed all the above instructions, 

please consult the nearest authorised 

service centre.

• 

The appliance you have purchased is 

designed for domestic use only. It is not 

suitable for commercial or common use. 

If the consumer uses the appliance in a 

way that does not comply with this, we 

emphasise that the manufacturer and 

the dealer will not be responsible for any 

repair and failure within the guarantee 

period.

Summary of Contents for EFUL48BE





















Reviews: