Page 3
www.elector-water-treatment.com
CLARIMAX 1200 DM pH+ LED – Water-filter-system for treatment of heating-system make-up water
1.1.2 Operator obligations
The operator of the unit is responsible for:
- The instruction of the user
- Regular maintenance
1.2 Safety instructions
-> Please read this guide carefully before comissioning and follow the instructions. Keep this guide accessible
at all times.
-> Personal injury, caused by non-observance of this guide, are not covered by the product liability law.
-> The manufacturer takes no liability for any other damages caused by non-observance of this guide.
Please note:
Safety instructions warn against dangers and help to prevent personal injury and damage to property. Comply
with the safety instructions for your own safety. The applicable national and international safety regulations
must be observed. Every operator is responsible for compliance with the regulations applicable to him and must
make every effort to comply with the latest regulations.
1.2.1 Safety regulations
• The CLARIMAX water filter system shall only be used by trained service technicians.
• The manufacturer‘s specifications must be complied with for maintenance and / or replacement of spare
parts.
• In case of unauthorized modifications at the device, the CE declaration of the manufacturer expires.
• The manufacturer takes no liability for damage caused by improper use. Furthermore, the warranty expires.
• CLARIAMX must not be operated in potentially explosive atmospheres.
• CLARIMAX must only be used in perfect condition.
• CLARIMAX must only be used for treatment of tap water with a quality according to the local tap water law.
Treatment of acids, alkalis, etc. is not permitted.
• Check the system for possible damage prior use.
• The intended use within the performance limits must be ensured.
• Release water pressure from the unit and / or disconnect it from the mains supply before any repairs.
• Damaged equipment must be put out of service.
• Repairs should only be done by qualified personel.
• Observe relevant and binding standards, such as DIN EN 1717; DIN 1988 etc.
1.2.2 Disclaimer
The use must be carried out exactly as desribed in this manual. The manufacturer is not liable for any damage
including consequential damage that may result from improper installation or misuse of the product.