■ Name and function of each part
Check the lit status of the lamps.
• Check that the lamps on the modem or similar device
and this product are lit correctly.
Connect the devices.
Refer to the diagram and wire the devices.
Terminal device
(cable TV modem,
ONU, CTU, ADSL)
LAN cable
INTERNET port (blue)
* Vertical orientation
POWER:Lit
INTERNET:
Blinking or solid
❶ Connect the power cable of the terminal device.
・If a power switch is present, slide the switch to the on position.
❷ Connect the included
AC adapter to this product.
Turn on the terminal device and this product.
■
Using this product in router mode
Setup Guide
WRC-1167GHBK3-A・WRC-F1167ACF2・WRC-1167FEBK-A・WRC-733FEBK2-A
Installation method and precautions
The stand is not fixed to the product. Connect the cables to the product,
and then set the product into the stand.
This product can be installed vertically or horizontally. With either orienta-
tion, be sure to stabilize the product by setting it into the included stand.
Also, with either orientation, take measures to prevent the product from
falling over and the cables from being pulled out. The product falling over
or the cables being pulled out from the connectors while the product is in
operation may lead to malfunctions or data loss.
◆Vertical orientation
• Use the side with the LED lamps as the front.
• Refer to the illustration and set the product
into the included stand so that the back of the
product fits snugly in the grooves on the
stand.
◆Horizontal orientation
• Use the side with the LED lamps as the top.
• Place the product on the included stand so
that the product is on top of the center,
back part of the stand, and then ensure that
the product is steady.
This manual provides a summary of and the specifications for this product as well as explains this product's usage
precautions.
It also contains an FAQ that explains actions you can take if you have problems such as the product malfunctioning.
Note that this manual is common for the WRC-1167GHBK3-A・WRC-F1167ACF2・WRC-1167FEBK-A・WRC-733FEBK2-A.
Back
Back
Back
❶To an AC outlet
AC adapter
AC outlet
WPS lamp
(red)
Blinking:
Off:The WPS function is not running.
The WPS setting button has been pressed, and the WPS function is running.
This lamp blinks once every 0.5 second for approximately 2 minutes.
POWER lamp
(white)
Lit: The product is on.
Off: The product is off.
2.4G WLAN lamp
(white)
5G WLAN lamp
(white)
WPS setting
button
Reset button
LAN port/
LAN lamp
1-4 (white)
INTERNET port/
INTERNET lamp
(white)
DC IN
(
power supply jack)
Stand
Left side
Back
These lamps indicate the connection status of the 2.4 GHz band (11n/g/b) and the
5 GHz band (11ac/n/a).
Lit: The corresponding band can be used.
Blinking: The corresponding band is in use.
Off: The corresponding band is disabled.
Use this button when you are connecting the product to a wireless slave device
(such as a wireless adapter) that is equipped with a WPS function.
To use this function, press this button for 2 seconds or more.
When you press this button for approximately 5 seconds, the WPS lamp blinks
and the product's settings are initialized (returned to the factory default values).
Do not turn off the product until the lamp stops blinking.
Use these ports to connect this product to PCs or other network devices over a
wired LAN.There is an LED lamp next to each port.
Lit: The link to the PC or network device connected over a wired LAN has been
established.
Blinking: Data is being transferred. Off: The cable is disconnected.
Connect the cable from the WAN (Internet) device of the modem (ONU, CTU, and
other types). There is an LED lamp next to the port.
Lit: The link to the WAN device has been established.
Blinking: Data is being transferred. Off: The cable is disconnected.
Connect the AC adapter included with this product to this jack. Do not connect
any AC adapters other than the one included with this product.
You can use the stand included with this product to orient it vertically or
horizontally. For details on how to use the stand, see "Installation method and
precautions" below.
