- 1 -
M-PG3DL series
Batteries
CAUTION
For this product, use AA alkaline batteries, AA manganese
batteries or rechargeable AA nickel hydride batteries.
If this product will be unused for a long period of time,
remove the battery to avoid battery leakage and failure.
Cleaning the Mouse
If the product body becomes dirty, wipe it with a soft, dry cloth.
Use of a volatile liquid (paint thinner, benzene, alcohol,
etc.) may affect the material quality and colour of the
product.
Cautions for Wireless Equipment
This product is wireless equipment using the entire range
of the 2.4 GHz band and it is possible to avoid the band of
mobile object identification systems. DS-SS is used for the radio wave
method. The interference distance is 10 m.
The 2.4 GHz band is also used by medical equipment, Bluetooth, and
wireless LAN equipment conforming to the IEEE802.11b/11g/11n standard.
Before using this product, check that there are no other “radio
•
stations”* operating nearby.
If electromagnetic interference occurs between this product
•
and other “radio stations”, move this product to another
location or stop using this product.
* Other “radio stations” refer to industrial, scientific and medical devices
using the 2.4 GHz band like this product, other radio stations of this type,
licensed radio station premises for mobile object identification system
that is used in factory production lines, certain non-licensed low power
radio stations and amateur radio stations.
WARNING
Do not use this product with a device that may have a
●
serious function or influence. There are rare cases where
an external radio wave at the same frequency or the
radio wave emitted from a mobile phone causes this
product to malfunction, slow down, or fail to operate.
Do not use this product in a hospital or other locations
●
where the use of radio waves is prohibited. The radio
waves of this product may affect electronic and medical
devices (e.g. pacemaker).
The use of a wireless mouse in an aircraft is prohibited by
●
aviation law because doing so may interfere with flight
safety. Turn off the power of the mouse body before
boarding an aircraft and do not use it in the aircraft.
* ELECOM is not liable for any accident or social
damages incurred by the failure of this product.
Cautions for Laser Mouse
Though this product complies with the IEC60825-1 Class 1 laser
safety standard to ensure safety, pay special attention to the
following before use.
(1) Never observe the laser beam by using an optical measure
such as a microscope or magnifier or view the laser with the
naked eye for a long period of time. Doing so may have an
adverse effect on the eye. (Some laser beams cannot be seen
with the naked eye.)
(2) Never aim the rear surface of the mouse at a person’s eyes, as
this is very dangerous.
(3) The laser sensor may not work on glass or mirrored surfaces.
(4) Do not use this product for any application other than as a PC
mouse.
(5) If this product is subjected to temperatures beyond its
specifications, turn off the PC, and do not use the product
until the temperature returns to the operable range.
(6) If this product is not operating normally, turn off the PC.
Package Contents
This product’s packaging contains the items listed below. Before
using the product, check that all items are present. We make
every effort to ensure that all products are packaged correctly.
However, in the event that an item is missing or damaged,
contact the retailer from whom you purchased the product.
Mouse x1
•
Receiver unit x1
•
AA alkaline battery x1
•
User’s Manual x1
•
Safety Precautions
Part Names
Installing·Replacing the Battery
Before using this product, install one AA battery in the mouse body.
Remove the battery cover.
Insert the battery.
Insert into the inner side at an
angle, and press down.
Make sure that the
y
polarity is correct.
Install the battery cover
as before.
Replacing the Battery
Remove the battery cover..
Remove the battery.
Pull up to directly above, and
remove the battery.
Insert the battery.
Install the battery cover as
before.
Turning On and Off the Mouse
Turning on the mouse
When using this product, turn the mouse body
power on.
Push the pressed-in power switch. The switch
pops up, and the Remaining battery level
indicator lamp briefly lights red.
* When the remaining battery level is low, the remaining battery
level indicator lamp is flashed in red for a certain period.
Turning off the mouse
When not using this product, turn the mouse
body off to save battery power.
Press the power switch.
Restoring from sleep state
Move the mouse.
To reduce battery drain, the mouse enters sleep mode
automatically if it is left without being operated for a certain
period of time with the power or switch turned on.
Inserting and Taking Out the Receiver Unit
Inserting the receiver unit
Remove the battery cover.
Place the receiver unit into the
receiver unit housing.
Install the battery cover as
before.
Taking out the receiver unit
Remove the battery cover.
Take the receiver unit out of the
receiver unit housing.
Install the battery cover as
before.
OFF
ON
ON
OFF
Preparation before Use
Meaning of symbols
WARNING
Failure to observe precautions
may result in serious personal
injury or death due to fire,
electric shock, or other causes.
CAUTION
Failure to observe precautions
may result in personal injury
due to electric shock or other
causes, and may damage
other equipment.
Prohibited action
Mandatory action
Situation that needs attention
Notes and reference information
Observe these precautions carefully to avoid
personal injury, damage, fire, and other problems.
WARNING
If a foreign object (water, metal chip, etc.)
enters the product, immediately stop using
the product and disconnect the receiver
unit from the PC, and remove the battery
from the mouse. If you continue to use the
product under these conditions, it may
cause a fire or electric shock.
If an abnormality is found with this product
(emission of heat, smoke or abnormal smell
from the product), immediately stop using
the product, shutdown the PC, and after
thoroughly checking that heat from the
product will not cause burns, disconnect
the receiver unit from the PC, and remove
the battery from the mouse. After doing
this, contact the retailer from whom you
purchased the product.
The receiver unit contains small parts that
could be swallowed by a child. Ensure that
the unit is stored in an area where it is not
accessible to children.
WARNING
Do not drop or hit this product.
If this product is damaged, immediately
stop using the product and disconnect the
receiver unit from the PC, and remove the
battery from the mouse.
If you continue to use the product under
these conditions, it may cause a fire or
electric shock.
Do not attempt to disassemble, modify
or repair this product by yourself, as this
may cause a fire, electric shock or product
damage.
Do not put this product in fire, as the
product may burst, resulting in a fire or
injury.
Do not connect or disconnect the receiver
unit with a wet hand, modify the receiver
unit or bend it forcibly, as this may cause a
fire or electric shock.
CAUTION
Do not place this product in any of the
following environments:
In a car exposed to sunlight, a place exposed
•
to direct sunlight, or a place that becomes
hot (around a heater, etc.)
In a moist place or a place where condensation
•
may occur
In an uneven place or a place exposed to
•
vibration
In a place where a magnetic field is generated
•
(near a magnet, etc.)
In a dusty place
•
This product does not have a waterproof
structure. Use and store this product in a
place where the product body will not be
splashed with water or other liquid.
Rain, water mist, juice, coffee, steam or
sweat may also cause product damage.
When you no longer need to use this
product and the battery, be sure to
dispose of it in accordance with the local
ordinances and laws of your area.
Mouse
Bottom
Inside battery cover
Receiver unit
Left button
Used for left-click operation.
Right button
Used for right-click operation.
Tilt Wheel
The tilt wheel can be turned back and forward with your
finger or pressed like a button to operate the PC.
Tilting the tilt wheel to the right or left lets you scroll
horizontally.
To use the horizontal scrolling function and high-speed
scrolling functions, it is necessary to download ELECOM
MouseAssistant 2 for Windows from the ELECOM
website.
Using the horizontal scrolling and button allocation
functions (See reverse)
d
Remaining battery level indicator lamp
Indicates when to replace the batteries.
* When power is on, the lamp temporarily lights red to
indicate that there is sufficient battery life, and begins
flashing when battery life is low. If battery life becomes low
during use, the lamp will flash red for a certain period.
e
Power switch
Used to turn the mouse body on and off.
f
Laser sensor
When the mouse body is moved, this sensor detects mouse
movement.
* Avoid looking directly at the light of the sensor as doing so
may cause eye damage. Some laser beams cannot be seen
with the naked eye.
g
Battery cover
This cover is removed to install batteries.
h
Receiver unit housing
Used to store the receiver unit.
i
Battery housing
Batteries are inserted here.
j
USB connector (Male)
Connected to a PC USB port.
Wireless Laser Mouse with Nano-Receiver
M-PG3DL series
User's manual
Thank you for purchasing the ELECOM M-PG3DL Series Wireless Laser Mouse with Nano-Receiver.
This manual describes the operating instructions and safety precautions for using the M-PG3DL
Series. Ensure that you have read this manual before using the product. After reading this
manual, store it somewhere safe for future reference.
* Except in certain cases, the M-PG3DL Series is referred to as “this product” in this manual.
S
tep
1
Check USB ports
Check the USB port on your computer.
USB port
Any USB port may be used.
y
This product can be connected to a USB hub. However,
y
it may not work depending on the power supply
capability of the USB hub.
S
tep
2
Installing the Receiver Unit
Activate the PC
If Windows® prompts you to choose an account (a user
●
name) when it starts up, be sure to log on using an
administrator account.
Wait until Windows® has started up completely.
●
Insert the receiver unit into the USB port of the PC
USB port
Receiver unit
Insert here.
Carefully check the orientation of the connector
y
and the place where you will connect the receiver
unit.
If you feel strong resistance when inserting
y
the receiver unit, check that the shape and
orientation of the connector is correct. Using
excessive force may damage the connector and
cause injury.
The mouse driver is installed automatically.
S
tep
3
Checking wheel operation
Check that the mouse vertical scrolling functions are working
correctly in Windows® Internet Explorer.
From the [Start] menu, select [All Programs], and
then [Internet Explorer].
Internet Explorer will launch.
Display your favourite web site in Internet Explorer
and change the size of the window so that the
vertical scrollbar appears.
* The sample website used here is the ELECOM homepage.
Scrollbar
Scroll the tilt wheel back and forth.
The mouse is operating normally if the screen
moves up and down as you scroll the tilt wheel.
In applications that do not support scrolling, the
y
screen will not move when you scroll the tilt wheel.
In order to use this product’s horizontal scrolling
function, you must download and install ELECOM
MouseAssistant 2 for Windows from our company’s web
site.
Proceed to “Using the horizontal scrolling and button
allocation functions” on the reverse of this sheet.
When using Windows®
S
tep
1
Check USB ports
Check the USB port on your computer.
USB port
Any USB port may be used.
y
This product can be connected to a USB hub. However,
y
it may not work depending on the power supply
capability of the USB hub.
S
tep
2
Installing the Receiver Unit
Activate the Macintosh.
Wait until Mac OS X has started up completely.
●
Insert the receiver unit into a USB port on your
Macintosh.
USB port
Receiver unit
Insert here.
Carefully check the orientation of the connector
y
and the place where you will connect the
receiver unit.
If you feel strong resistance when inserting
y
the receiver unit, check that the shape and
orientation of the connector is correct. Using
excessive force may damage the connector and
cause injury.
The mouse driver is installed automatically.
S
tep
3
Checking operation
Check that the mouse vertical scrolling functions are working
correctly in Safari.
Click the Safari icon in the Dock.
Safari will launch.
If Safari is not in the Dock, double-
click the Safari icon in the Applications
folder.
Display your favourite web site in Safari and
change the size of the window so that the vertical
and horizontal scrollbars appear.
* The sample website used here is the ELECOM homepage.
Scrollbar
Scroll the tilt wheel back and forth and move it from
side to side.
The mouse is operating normally if the screen moves up and
down or from side to side as you scroll or move the tilt wheel.
In applications that do not support scrolling, the
y
screen will not move when you scroll the tilt wheel.
In order to use this product’s button allocation
y
function with a Mac, you must download and
install ELECOM MouseAssistant 2 for Mac OS X
from our company’s web site.
Proceed to “Using the horizontal scrolling and button
allocation functions” on the reverse of this sheet.
Up and down scrolling operation in MAC OS X 10.7
works in reverse from typical models. This can be
changed in the mouse settings screen.
When using Mac OS X®
Disconnecting the receiver unit
This product is hot-pluggable. It is possible to disconnect the
receiver unit when PC is running.
Operation may become unstable if the receiver unit is
disconnected and reconnected several times when PC is
running. If this occurs, restart PC.
