MANUAL ELDES ESIM264 V3.2
MANUAL ELDES ESIM264 V3.2
11. iBUTTON KEYS
An iButton key is a unique 64-bit ID code containing chip enclosed in a stainless steel tab usually implemented in a small plastic holder.
ESIM264 system supports up to 5 iButton keys each holding a unique identity code (ID), which is used for system arming and disarming.
11.1. Adding and Removing iButton Keys
NOTE:
iButton Key 1 can be added without Allow Adding New iButton Keys mode being enabled.
To add an iButton key to the system, do the following:
a) Disarm the system in all partitions (see
12. ARMING AND DISARMING
).
b) Enable Allow Adding New iButton Keys mode.
c) T ouch the key to the iButton key reader when the system is disarmed (see picture below).
29
d) The successfully added iButton key will be indicated by short beeps emitted by the system’s buzzer.
e) Add as many iButton keys as necessary – touch one key after another to the reader – until the number of 5 keys is reached.
Enable Allow Adding
New iButton Keys
mode
SMS
SMS text message content:
ssss_IBPROG:ON
Value:
ssss
– 4-digit SMS password.
Example:
1111_IBPROG:ON
EKB2
Menu path:
OK
→
CONFIGURATION
→
OK
→
aaaa
→
OK
→
IBUTTON KEYS
→
OK
→
NEW IBUTTON
→
OK
→
ENABLE
→
OK
Value:
aaaa
– 4-digit administrator password.
EKB3
Enter parameter 18 and parameter status value:
18 0 #
Example:
180#
Config
Tool
This operation may be carried out from the PC using the
ELDES Configuration Tool
software.
When adding of iButton keys is complete, please disable Allow Adding New iButton Keys mode.
Disable Allow Adding
New iButton Keys
mode
SMS
SMS text message content:
ssss_IBPROG:OFF
Value:
ssss
– 4-digit SMS password.
Example:
1111_IBPROG:ON
EKB2
Menu path:
OK
→
CONFIGURATION
→
OK
→
aaaa
→
OK
→
IBUTTON KEYS
→
OK
→
NEW IBUTTON
→
OK
→
DISABLE
→
OK
Value:
aaaa
– 4-digit administrator password.
EKB3
Enter parameter 18 and parameter status value:
18 1 #
Example:
181#
Config
Tool
This operation may be carried out from the PC using the
ELDES Configuration Tool
software.
To view the ID of the added iButton keys, please refer to the following configuration methods.
View iButton key ID
EKB2
Menu path:
OK
→
CONFIGURATION
→
OK
→
aaaa
→
OK
→
IBUTTON KEYS
→
OK
→
IBUTTON 1... 5
→
OK
→
ID
Value:
aaaa
– 4-digit administrator password.
Config
Tool
This operation may be carried out from the PC using the
ELDES Configuration Tool
software.
If the iButton key is lost or stolen, due to security reasons it is highly recommended to remove it from the system.
Remove individual
iButton key from the
system
EKB2
Menu path:
OK
→
CONFIGURATION
→
OK
→
aaaa
→
OK
→
IBUTTON KEYS
→
OK
→
IBUTTON 1... 5
→
OK
→
REMOVE
→
OK
Value:
aaaa
– 4-digit administrator password.
Config
Tool
This operation may be carried out from the PC using the
ELDES Configuration Tool
software.
Remove all iButton
keys from the system
SMS
SMS text message content:
ssss_RESETIB
Value:
ssss
– 4-digit SMS password.
Example:
1111_RESETIB
