ELDAN MPR200T, Manual, Page: 29 / 202

6.5 Exchange of the static knives
Disconnect the main current by maintenance work, repair etc.
Lock the main switch by maintenance work, repair etc.
It is absolutely prohibited and highly dangerous to open the machine
before it has been brought to a complete stop.
When opening/closing the machine the operator must be absolutely
sure that nobody is on or near the machine.
Use gloves for hand protection by maintenance work etc. The ma-
chine can be very hot after continuous operation.
When replacing the knives the use of safety glasses is necessary,
because of the danger of splinters when the knives are exposed to
strokes and bumps.
From Figure 6 it can be seen that the static knife assembly consists of a
row of single knives, separately adjusted.
All knives can be exchanged without removing the knife holder.
The following instructions explain t he whole procedure and the checklist
details what steps should be taken for each knife set.
ELDAN Recycling A/S Page 27