FOS 100w
Version: 2010/08/13
22
4
Important notes
4.1
Manufacturer´s declaration
The manufacturer confirms that the ELCONnect fiber FOS 100w has been designed for the
transfer of data information and, subject to its proper usage, complies with the relevant safety
standards and the applicable EMC requirements
Note:
The device belongs to equipment of class B.
4.2
Warranty
This documentation compiled by ELCON Systemtechnik GmbH is based on best available
technology. However, although applying due diligence, it is impossible to exclude all mis-
takes and technical inaccuracies. In view of the rapid technological progress, ELCON re-
serves the right to modifications and improvements without prior notification. For this reason
ELCON assumes no liability for the content of this document.
Further, ELCON shall not be responsible for any loss or incorrect use of information or data
which may result from using this document. In addition, ELCON cannot be held liable for
damages, whether direct or indirect (including, but not limited to, financial losses, delayed
business transactions, disruption of business or similar consequences), incurred as a result of
improper use of the equipment.
This documentation has been made to explain the functionality of the FOS 100w. It describes
installation and application of the device and its supplementary equipment, drivers and soft-
ware tools (if required). Detailed information, addressing client-specific solutions, can be
taken from the relevant user manual.
Further information on the operation of peripheral equipment and installations, in particular
about the installation of cable TV networks, computer hardware and the available access
technologies, can be received from your telecommunications network operator or Internet
Service Provider, or the respective user manuals.
Note: This documentation may describe performance features which cannot be used in the
specific application case.
4.3
Rights and trademarks
With respect to the information contained in this documentation ELCON provides no warran-
ties as for the non-existence of industrial property rights (trademarks, patents, utility models,
etc.). Generally used trademarks, trade names, company and product names are subject to the
respective trademark, patent, utility model or registered design rights.
The information in this document must not be copied, neither in full nor in extracts, trans-
lated, reprinted or transferred in any other way.
The purchase of software and equipment shall be governed by the General Terms and Condi-
tions for the Sale and Supply of Products and Services and the License Conditions of ELCON
Systemtechnik GmbH.
